Jura Coffee Machine Drip Tray Won't Go Back In

Jura Coffee Machine Drip Tray Won't Go Back In. The start screen is displayed. Take out the grounds basket.

Jura E6 Automatic Coffee Machine Review Price, Pros, Cons from www.cuppabean.com

The display shows the message 'use only original jura maintenance products'. E if the filter is active, this is indicated by a blue filter symbol at the top of the display. Tap this message to go to the right menu.

Source: www.productreview.com.au

An image explains what has happened: Dirt often gets accumulated at the narrowest part of the drip tray, making the jura machine believe there is water in the drip tray.

Source: www.cuppabean.com

This is caused by the metal contacts being dirty and damp usually. Up to 15% cash back at the back of the drip tray are 2 metal strips, these have to be clean, make sure there is not muck right at the bottom where they would meet the water, usually this gets grimy and holds the damp, this fools the machine into thinking there is water in the tray, you need to clean right in between the bottom of these at the narrowest part.

The Machine Will Say Fill Tank.

“empty coffee grounds container / drip tray missing” symbol. First, check the grind setting and adjust to a coarser grind. The coffee grounds container is full, the drip tray is missing or has not been inserted correctly.

I Have A Jura Ena Micro And The Used Grounds Bin Is Somehow Stuck.

Now it will remove the solvent from the system. You may avoid a water filter if your jura coffee machine is connected directly to your water supply. Tap 'start' to confirm the program.

The Display Shows 'Approximate Duration 45 Min.'.

Here are some of the highlights straight from jura: At the back of the drip tray are 2 metal strips, these have to be clean. The demonstration shows the part to clean wh.

The Grounds Container Tray Was Reinserted Too Soon After The Machine Asked To Empty The Grounds.

Jura “empty drip tray” error. The display shows the message 'use only original jura maintenance products'. If fill system appears several times and the process doesn't run properly when using for the first time, fill the water tank with warm water.

It Is A Good Idea To Wipe The Sides Of The Drip Tray.

Mine is the j5 impressa. E if the filter is active, this is indicated by a blue filter symbol at the top of the display. Once all the solvent water has gone through the machine it will say: