Washing Machine P Trap Height
Washing Machine P Trap Height. A clotheswasher puts out copious amounts on h20. This is the most commonly used type of wash pipe.
No trap for any clothes washer standpipe receptor shall be installed below the floor, but shall be roughed in not less than six (6) inches (152 mm) and. Does the drain/standpipe for a washing machine need a p trap? Standpipes shall be individually trapped.
A Standpipe Extends From The Outlet Box To The Trap Below.
On plumbing a washing machine drain diagrams. In many jurisdictions, that height is 36 to 42 inches. The correct way to drain a washing machine is to install a standpipe.
Do Not Use Solder Couplings To Remake The Joints.
Washing machine p trap diagram.in many jurisdictions, that height is 36 to 42 inches. Standpipes shall be individually trapped. Does the drain/standpipe for a washing machine need a p trap?
Most Of The Washing Machines Are Around 42 Inches Tall.
Washing machine drain pipes the following is a list of drain pipes that can be used to drain and trap the water in a wash machine: Most of the washing machines are around 42 inches tall. It is my understanding that the p trap should not be more than 5 feet from the venting, so i suspect it would not work to locate the p trap by the washer.
This Is The Most Commonly Used Type Of Wash Pipe.
A clotheswasher puts out copious amounts on h20. A trap on the washing machine is. The idea is to have the top of the stand pipe at 36 maximum.
The Washing Machine's Drain Hose Is Inserted Into The Top Of The Standpipe Where It Fits Into The Outlet Box.
Whirlpool recommends a minimum of 39” above the floor, and ge has a 30” minimum, except that ge allows the top of the drain pipe opening to be lower if you secure the. No trap for any clothes washer standpipe receptor shall be installed below the floor, but shall be roughed in not less than six (6) inches (152 mm) and. (457 mm) above its trap.
Post a Comment for "Washing Machine P Trap Height"