How To Set Up Suction Machine
How To Set Up Suction Machine. Pick up clean suction catheter. Using dominant hand, test suction catheter in the sterile water in basin.
Lubricate the suction catheter with the. Attach the yankeur to the other end of the long tube. Suction machine | directions for setup.
Suction Machine Operating Instructions Set Up 1.
Locate vacuum adjust knob and with suction tubing occluded, adjust suction pressure to ~100 mmhg. Connect the long, clear plastic 6 foot connecting tube on to the “patient” port on the canister lid. It is a type continue reading →
Ensure Main Suction Control Is Switched To On.
Turn suction machine to proper setting according to order. For help setting up your suction machine for the first time, this packet will guide you through the entire process. Filter gets clogged up quickly, reducing suction ability and requiring constant cleaning/replacement
Community Hospice Durable Medical Equipment:
Actuate the blast gun continuously at the blast pressure you normally use, and watch the flow in the media hose between the pickup tube and the back of the blast cabinet. How do you turn on a suction machine? Its submitted by supervision in the best field.
Connect One End Of The Short Tube To The Top Of The Container And The Other End To The Machine.
Adjust the pressure on the suction machine to the desired level 1. High suction capacity that’s good for multiple hoses around the shop; Place the patient in a comfortable position, with her head supported by a pillow.
Connect Both Pieces Of Tubing:
Proceed with suction device selection and attachment as previously described. Connect suction tubing to suction cannister and ensure tubing from vacuum regulator is connected tightly. The general process for setting up a suction machine begins with inspecting the outer components, such as the power cord, for any defects and damages.
Post a Comment for "How To Set Up Suction Machine"