Cotton Candy Machine Troubleshooting
Cotton Candy Machine Troubleshooting. Check heat control for correct setting. Wait one minute and then restart.
Extractor head is not spinning. The following procedure is required to ensure proper operation of the machine. The spinner head will not start to.
The Spinner Head Will Not Start To.
Connect the power cord to the base and plug it into a grounded outlet. Check for excessive carbon on the ribbons. Once the tiny strands of melted sugar are cooled by the air, it becomes the cotton candy to be gathered.
Turn “On” The Motor Switch.
Extractor head rattles or comes loose during operation. Keys to the machine are located inside the vending chamber. It has a heating element of.
Turn The Candy Switch To “On”.
The switch will light up. This will show you the problem and solution to get it running again! The following procedure is required to ensure proper operation of the machine.
Tornado Candyfloss Machines Are Not Designed For Exposure To Water.
Buyers love this colorful cotton candy machine with its powerful direct drive motor. Place the machine on a flat, level table and place the large aluminum bowl on the machine base. You could even set up shop at a local fair or carnival and make some money serving cotton candy.
Popcorn Snow Cone Cotton Candy Hot Dogs Warmer/Pumps Fryers Lemonade
Extractor head not fastened properly You don’t need detergent, water is enough. By doing this, you’ll be.
Post a Comment for "Cotton Candy Machine Troubleshooting"